protectionopk.blogg.se - Remove wifi network mac address

This allows the Wi-Fi client back to the configuration page if needed. When using a Wi-Fi client to configure Whitelist, include the MAC address of the Wi-Fi client that is performing this setup.

NOTE 1: It is recommended to setup the configuration with a device connected by Ethernet cable to the SBG7400AC2. It can be found in the SBG7400AC2 Web Manager or from the client device's network information. Requirement The Wi-Fi client's MAC Address is require for MAC Address Control setup.

Blacklist: device must NOT be listed below. - Wireless clients added to the list are not allowed.

Whitelist: devices must be listed below. - Wireless clients added to the list are allowed.

None: Any device can try to connect. - All Wireless clients are allowed on the wireless network.

There are 3 types of MAC Address filters: This document describes how to gather the client MAC address and setup MAC Address Control feature in the SBG7400AC2. The MAC address of the Wi-Fi client is added to the MAC Address Filter List to allow or restrict access to the Wi-Fi network on both the Wireless 2.4 Ghz and Wireless 5 GHz or independently. The SBG7400AC2 MAC Address Control feature provides the ability to restrict Wi-Fi clients, such as smart phones and laptops, from accessing the Wi-Fi network. Various other trademarks are held by their respective owners.When Wi-Fi clients connect to the SBG7400AC2, the client can connect to either one or the other 2.4 Ghz or 5 GHz SSID. WatchGuard and the WatchGuard logo are registered trademarks or trademarks of WatchGuard Technologies in the United States and other countries. The MAC addresses added to the list are exported to a. To export the list of MAC addresses in the whitelist and blacklist, click Export MAC Address List.

Type a MAC address in the Quick Search text box.

To search for a MAC address that has been added to a list:

Select a MAC address from the Blacklist MAC Address or Whitelist MAC Address list.

txt file that contains the MAC addresses. Select Whitelist MAC Address or Blacklist MAC Address.To autofill the blacklist and whitelist MAC addresses from a file: Repeat the procedure to add additional MAC addresses.In the MAC Address text box, type the MAC address to add.Select the Enable Client MAC Whitelist / Blacklist check box.MAC addresses listed in the Blacklist are denied access, while all other clients are allowed access to the SSID.MAC addresses listed in the Whitelist are allowed access to the SSID, while all other clients are denied access.For each SSID, you can add a maximum of 1024 clients to a Whitelist or Blacklist. You can create a list of allowed or denied wireless clients for an SSID profile based on the MAC address. Client MAC Address Whitelist and Blacklist